Solid precast walls in typical thickness of 6" or greater may be loadbearing or non-loadbearing. Reveals, articulation, decorative accents, mix design(s) available to meet design requirements.
- Typical 6" thickness or greater
- Aesthetic flexibility; multiple finishes, colors, textures and shapes
- Separate insulation system required
Exterior walls require supplemental insulation systems to conform with energy code requirements. Interior walls are available with a paint-ready trowel-finished surface.
Cost: $$-$$$
Connections are typically welded or bolted
Concrete
Mix: architectural face mix; structural back mix with EcoMix® (up to 50% supplementary cementitious materials recycled content, per design requirements)
Water-cement ratio: <.38
Strength: 7-9,000 psi
Color: per Architect requirements
Specifications:
Certification . . . . . . . . . . . . . . . . . PCI Factory Certification
Design. . . . . . . . . . . . . . . . . . . . . .ACI 318-95
Prestress strand . . . . . . . . . . . . . .ASTM A 416
Reinforcing steel. . . . . . . . . . . . . .ASTM A 615
Welded wire fabric . . . . . . . . . . . .ASTM A 185
Structural steel . . . . . . . . . . . . . . .ASTM A 36
Aggregate. . . . . . . . . . . . . . . . . . .ASTM C 33
Cement. . . . . . . . . . . . . . . . . . . . .ASTM C 150 Materials
Dimensional Tolerances:
Horizontal alignment:
Position of Weld Plates: ±1 in.
Varying thicknesses – interior and exterior wythes are typically 1-3/4” thick. The exterior wythe can be thickened to accommodate architectural details.
Shapes – an assortment of architectural elements such as cornices, bullnoses and reveals can be cast into the concrete carefully and cost-efficiently.
Embedded finishes and veneers – stone, tile and thin brick can also be used as well as simulated limestone or granite.
Panel orientation – typical orientation will be horizontal; vertical orientation is possible.
Prefinished interior wythe – a steel-trowel treatment during manufacturing imparts a smooth, durable, surface ready for paint or wallcovering and is ideal for applications such as dormitories and apartments.
Grouted connection tubes – prefabricated plastic forms, fit into foundations and panels to facilitate connection (www.highconcreteaccessories.com)
Potential precast point contributions to LEED 2009 certification:
|
Credit |
|
Potential Point Contributions |
|
Sustainable Sites |
|
|
|
SS Credit 5.1 |
Site Development, Protect or Restore Habitat |
1 |
|
Materials & Resources |
|
|
|
MR Credit 4.1 |
Recycled Content, 10% (post-consumer + pre-consumer) |
1 |
|
MR Credit 5.1 |
Regional Materials, 10% Extracted, Processed & Manufactured Region |
1 |
|
MR Credit 5.2 |
Regional Materials, 20% Extracted, Processed & Manufactured Region |
1 |
|
Indoor Environmental Quality |
|
|
|
EQc3.1 |
Construction Indoor Air Quality Management Plan: During Construction |
1 |
|
Innovation & Design Process |
|
|
|
ID Credit 1.1 |
Innovation in Design: Provide Specific Title |
1 |
|
ID Credit 2 |
LEED Accredited Professional |
1 |
LEED is a registered trademark of the US Green Building Council.
Choose a precast concrete finish
Use the menus below to find a range of precast finishes. Click and save up to four finishes to print in your cut sheet.
My Selections
Choose up to four finishes using the menus above to print in your cut sheet.
